Water resources monitoring system

Model：FT-LSZ06

Brand：fengtu

Water resources monitoring system is a comprehensive automatic monitoring system composed of modern sensor technology, automatic measurement technology and communication network....

Get a Free Quote

1. Product introduction of water resources monitoring system

The water resources monitoring system is also called the real-time water resources monitoring system and the water resources remote monitoring system. The water resources monitoring system is a comprehensive set of online automatic analysis instruments as the core, using modern sensor technology, automatic measurement technology, etc. and communication networks. automatic monitoring system. The FT-LSZ06 water resources monitoring system uses water quality sensors as the core. By monitoring and analyzing various water quality parameters, and transmitting the collected data to the platform, it can perform remote viewing of real-time data and remote management of equipment, and at the same time monitor water quality change trends. Effective over-limit alarms and intelligent processing can also represent a comprehensive index of water quality based on the correlation between real-time water quality parameters, providing customers with a large amount of objective, detailed and effective data, which has practical significance for solving water quality pollution problems.

At present, the FT-LSZ06 water resources monitoring system developed and produced by Shandong Fengtu Internet of Things Technology Co., Ltd. is widely used in aquaculture, sewage treatment, reservoirs, rivers and other places

2. Product features of water resources monitoring system

1. Low power collector: static power consumption is less than 50uA

2. Standard GPRS networking, support for extended Bluetooth and wired transmission

3.Support modbus485 sensor expansion

4. Solar charging management MPPT automatic power point tracking

5.1.5m carbon steel bracket

6. SMS alarm, send SMS to the designated mobile phone after exceeding the limit

7. ABS material protective box, corrosion-resistant, anti-oxidation, waterproof grade IP66

8. There is no need for additional processes such as wiring, station construction, chemical preparation, and post-maintenance personnel. Compared with the national standard water quality monitoring station, it is more convenient to use and install, and the observation data is more intuitive.

9. The system can integrate integrated meteorological environment monitoring data

3. Composition of water resources monitoring system

The water resources monitoring system mainly consists of basic supports (including vertical poles, floor cages, ABS anti-corrosion protection boxes), power supply systems, monitoring hosts, water quality sensors, and cloud platforms.

4. Technical parameters of water resources monitoring system

name	Measuring range	resolution	Accuracy
Water temperature sensor	-50～80℃	0.1℃	±0.5℃
conductivity sensor	0~200mS/m	0.2mS/m	＜±7%
Water quality pH sensor	0~14	0.01pH	±0.1pH
Turbidity sensor	0.1~3000NTU	0.1ug/l	<±5%FS
Dissolved oxygen	0~20mg/l	0.1mg/l	±3%
Ammonia nitrogen sensor	0-100mg/l	0.01mg/l	±3%FS
Remark:	Multi-channel data collector with 232 and 485 interfaces; Chinese LCD screen with backlight; Power supply mode: solar power or 220V AC; Communication mode: MQTT protocol and direct communication with the IoT cloud platform;