Water environment monitoring system

Model：FT-LSZ06

Brand：fengtu

The water environment monitoring system mainly realizes the monitoring and early warning of water pollution events. The whole operation process adopts unattended and programmed automatic water environment monitoring....

Get a Free Quote

1. Product introduction of water environment monitoring system

The water environment monitoring system is also called the water resources environment monitoring system and the water environment monitoring and early warning system. The water environment monitoring system mainly implements monitoring and early warning of water pollution events. The entire operation process uses unattended and program-controlled automatic water environment monitoring. The FT-LSZ06 water environment monitoring system takes the water quality sensor as the core. By monitoring and analyzing various water quality parameters, and transmitting the collected data to the platform, it can perform remote viewing of real-time data and remote management of equipment, and at the same time conduct monitoring of water quality change trends. Effective over-limit alarms and intelligent processing can also represent a comprehensive index of water quality based on the correlation between real-time water quality parameters, providing customers with a large amount of objective, detailed and effective data, which has practical significance for solving water quality pollution problems.

At present, the FT-LSZ06 water environment monitoring system developed and produced by Shandong Fengtu Internet of Things Technology Co., Ltd. is widely used in aquaculture, sewage treatment, reservoirs, rivers and other places

2. Product features of water environment monitoring system

1. Low power collector: static power consumption is less than 50uA

2. Standard GPRS networking, support for extended Bluetooth and wired transmission

3.Support modbus485 sensor expansion

4. Solar charging management MPPT automatic power point tracking

5.1.5m carbon steel bracket

6. SMS alarm, send SMS to the designated mobile phone after exceeding the limit

7. ABS material protective box, corrosion-resistant, anti-oxidation, waterproof grade IP66

8. There is no need for additional processes such as wiring, station construction, chemical preparation, and post-maintenance personnel. Compared with the national standard water quality monitoring station, it is more convenient to use and install, and the observation data is more intuitive.

9. The system can integrate integrated meteorological environment monitoring data

3. Composition of water environment monitoring system

The water environment monitoring system mainly consists of basic supports (including vertical poles, ground cages, ABS anti-corrosion and corrosion-resistant protection boxes), power supply systems, monitoring hosts, water quality sensors, and cloud platforms.

4. Technical parameters of water environment monitoring system

name	Measuring range	resolution	Accuracy
Water temperature sensor	-50～80℃	0.1℃	±0.5℃
conductivity sensor	0~200mS/m	0.2mS/m	＜±7%
Water quality pH sensor	0~14	0.01pH	±0.1pH
Turbidity sensor	0.1~3000NTU	0.1ug/l	<±5%FS
Dissolved oxygen	0~20mg/l	0.1mg/l	±3%
Ammonia nitrogen sensor	0-100mg/l	0.01mg/l	±3%FS
Remark:	Multi-channel data collector with 232 and 485 interfaces; Chinese LCD screen with backlight; Power supply mode: solar power or 220V AC; Communication mode: MQTT protocol and direct communication with the IoT cloud platform;