Multi-parameter water quality monitoring station

Model：FT-LSZ05

Brand：fengtu

The multi-parameter water quality monitoring station can realize automatic online water quality monitoring of different water bodies such as surface water and source water, and can monitor 5 parameters....

Get a Free Quote

1. Product introduction of multi-parameter water quality monitoring station

The multi-parameter water quality monitoring station is also called the water quality multi-parameter automatic monitoring station and the multi-parameter water quality micro-online monitoring station. The multi-parameter water quality monitoring station realizes automatic online monitoring of water quality in different water bodies such as surface water, source water, drinking water, and discharge outlets, and can monitor 5 parameters. The FT-LSZ05 multi-parameter water quality monitoring station uses water quality sensors as the core. By monitoring and analyzing various water quality parameters, and transmitting the collected data to the platform, it can perform remote viewing of real-time data and remote management of equipment, and at the same time monitor water quality change trends. It can carry out effective over-limit alarms and intelligent processing, and can also display a comprehensive index of water quality based on the correlation between real-time water quality parameters, providing customers with a large amount of objective and detailed effective data, which has practical significance for solving water quality pollution problems.

At present, the FT-LSZ05 water quality monitoring station developed and produced by Shandong Fengtu Internet of Things Technology Co., Ltd. is widely used in aquaculture, sewage treatment, reservoirs, rivers and other places

2. Product features of multi-parameter water quality monitoring station

1. Low power collector: static power consumption is less than 50uA

2. Standard GPRS networking, support for extended Bluetooth and wired transmission

3.Support modbus485 sensor expansion

4. Solar charging management MPPT automatic power point tracking

5.1.5m carbon steel bracket

6. SMS alarm, send SMS to the designated mobile phone after exceeding the limit

7. ABS material protective box, corrosion-resistant, anti-oxidation, waterproof grade IP66

8. There is no need for additional processes such as wiring, station construction, chemical preparation, and post-maintenance personnel. Compared with the national standard water quality monitoring station, it is more convenient to use and install, and the observation data is more intuitive.

9. The system can integrate integrated meteorological environment monitoring data

3. Multi-parameter water quality monitoring station system composition

The vertical pole-type water quality online monitoring system mainly consists of a basic bracket (including a vertical pole, a ground cage, and an ABS anti-corrosion protection box), a power supply system, a monitoring host, a water quality sensor, and a cloud platform.

4. Technical parameters of multi-parameter water quality monitoring station

name	Measuring range	resolution	Accuracy
Water temperature sensor	-50～80℃	0.1℃	±0.5℃
conductivity sensor	0~200mS/m	0.2mS/m	＜±7%
Water quality pH sensor	0~14	0.01pH	±0.1pH
Ammonia nitrogen sensor	0-100mg/l	0.01mg/l	±3%FS
Dissolved oxygen	0~20mg/l	0.1mg/l	±3%
Remark:	Multi-channel data collector with 232 and 485 interfaces; Chinese LCD screen with backlight; Power supply mode: solar power or 220V AC; Communication mode: MQTT protocol and direct communication with the IoT cloud platform;