On-line suspended matter sludge concentration meter

Model：FT-XFW1

Brand：fengtu

The on-line suspended sludge concentration meter is designed for measuring the suspended solids concentration and effluent turbidity of municipal sewage, industrial wastewater treatment process and waterworks....

Get a Free Quote

Product overview of online suspended solids sludge concentration meter

Online suspended solids sludge concentration meter, also known as suspended solids sludge concentration meter, is an industrial device designed for measuring the concentration of suspended solids in incoming water and turbidity of outgoing water in municipal sewage, industrial wastewater treatment processes, water plants, etc. Online monitoring instruments. It can be used to detect changes in activated sludge concentration in biochemical treatment processes, providing continuous and accurate measurement results.

Measurement principle of online suspended solids sludge concentration meter

After the light sent by the emitter on the sensor is absorbed, reflected and scattered by the measured object during the transmission process, only a small part of the light can illuminate the detector. The transmittance of the transmitted light has a certain relationship with the concentration of the measured sewage. Therefore, the concentration of sewage can be calculated by measuring the transmittance of transmitted light. The sensor of the new photoelectric suspended solids concentration meter uses four-beam technology, using two emitters and two detectors. The light sent by each emitter is transmitted and illuminated on the two detectors, thus generating a series of optical paths. , obtain a data matrix, and then by analyzing these data signals, the accurate concentration of suspended solids in the medium can be obtained, and interference can be effectively eliminated, deviations caused by pollution can be compensated, and the instrument can work in harsh environments.

Product features of online suspended solids sludge concentration meter

Multi-beam measurement technology to compensate for environmental effects;

Multiple parameters are displayed simultaneously: measured value, output current, time, concentration percentage, etc.;

4-20mA transmission output, relay high and low alarm control output, RS485 communication output and other variable outputs, system intelligent control;

Using two-point calibration method, sensor error can be corrected;

Various installation methods are available;

A variety of measurement units are available;

Chinese and English operation interface, easy to operate;

Technical parameters of online suspended solids sludge concentration meter transmitter:

Measuring range: 0~50g/L

Display mode: LCD liquid crystal display

Measurement units: g/L, mg/L and NTU optional

Resolution: 0.001 g/L or 1mg/L

Accuracy: ±1.0%FS

Repeatability: ±1.0%

Ambient temperature: -20~60℃