Fiber break tester

Fiber break tester product review

6426AFiber break tester is a 7-inch capacitive full touch screen, integrating automatic OTDR, expert OTDR, event map, optical power meter (OPM), visual red light fault location (VFL), stable light source (LS), multi-core test, loss test and other functions. The maximum dynamic range of OTDR is 28dB, which can achieve accurate testing up to 100km, the minimum event blind area is 3m, and the sampling resolution is up to 2.5cm. It is equipped with a 4600mAh high-density and large-capacity polymer lithium battery, with intelligent power saving management, and supports power supply and charging of power banks.

6426A is used to measure the length, loss, connection quality and other parameters of various optical fiber cables. It is widely used in the fields of fiber-to-the-home, metropolitan area network and secondary backbone network communication system engineering construction, line maintenance and emergency repair testing, optical fiber cable research and production measurement.

Fiber break tester main features

7-inch large touch screen, bringing smooth operation and comfortable visual experience;

28dB dynamic range, easily test 100km optical fiber line;

One-click automatic testing, automatic parameter configuration, automatic event analysis, and easy viewing of fault events;

Automatic photoeye map, graphical display of fault events, and clear and visible fault information;

OPM, red light, stable light source and other multi-functions are integrated into one to protect your engineering operations;

With optical testing, you can easily handle fiber-to-the-home scenarios and locate fault points in optical fiber lines;

Support Bellcore GR196 and SR-4731 file formats;

The light source supports continuous/modulated mode output;

4600mA large capacity battery and long battery life can meet your work needs for a whole day.

Fast automatic testing

The automatic test function makes it unnecessary for users to know more details about the operation of the instrument. The test steps become very simple. Users only need to enter "Auto OTDR", connect the optical fiber to the corresponding OTDR port of the product, and click the [Auto Test] button. The instrument will automatically set the corresponding test conditions and give the final test results, including test curves and event lists.

Automatic light detection and alarm function

When the OTDR tests a fiber link, if there is a communication optical signal in the fiber, the test result will be inaccurate, and even the detector inside the instrument will be irreversibly damaged. The 6426A has the function of automatically monitoring the communication optical signal in the tested fiber. As long as the tested fiber is connected to the product optical interface, it will automatically sense and monitor whether there is a communication optical signal in the fiber during the test phase. Once an optical signal is detected, an alarm message will be prompted in time to provide timely protection for the instrument.

Fiber break tester technical specifications

VFL (standard)

Working wavelength: 650nm±20nm

Output power: 2mW (typical)

Optical power meter (standard)

Wavelength range: 850nm～1650nm

Power range: -60dBm～+3dBm

Stable light source (standard)

Working wavelength: Same as OTDR working wavelength

Output power: ≥-5dBm

6426A OTDR Standard Module Technical Specifications

Single wavelength module:

Dual wavelength module:

Note:

1. Ambient temperature 23℃±5℃, maximum test pulse width, average time greater than 180s, SNR=1;

2. Range ≤ 1.6 km, pulse width 5 ns, fiber end face reflection loss ≥ 40 dB, typical value;

3. Range ≤ 1.6 km, pulse width 5 ns or less, fiber end face reflection loss ≥ 50 dB, typical value.

Ordering Information

Host: 6426A Fiber break tester

Standard configuration:

Optional accessories:

Purchase information: