Thermoelectric total radiation sensor

Thermoelectric total radiation sensor technical indicators

The total thermoelectric radiation sensor is also called the tilt radiation sensor. The total thermoelectric radiation sensor is a sensor used to monitor total solar radiation. It is designed based on the thermopile principle. The sensing element is made by winding a thermopile plated with multiple contacts.

·Power supply: DC12V

·Power consumption: 0.06W

·Working environment: -20~70℃ 

·Communication interface: RS485 

·Operating current: 5mA@DC12V

·Minimum data interval: 0.5S

Thermoelectric total radiation sensor parameters

Response time: ≤10S

Annual stability: ≤±3.1%

Zero point drift: ≤6 W/m²

Precautions for Thermoelectric Total Radiation Sensors

1. A protective cover must be installed during the transportation and storage of the sensor to prevent the sensor from being damaged by collision.

2. The installation and use of sensors should strictly comply with relevant technical indicators and installation instructions.

3. The sensor needs to be installed in an open, unobstructed, and non-reflective and refracted light environment.

4. The sensor should be installed away from other heat sources other than the sun and high-heat metals and other media.

5. The sensor installation should be adjusted to the horizontal position according to the horizontal ball of the sensor.

6. After installing the sensor, you need to install a light hood

7. After the sensor is installed, use a dust-free cloth to regularly clean and wipe the dust and debris on the glass cover.