Road ice sensor

1. Product introduction of road ice sensor

The road icing sensor is also called the road icing monitoring sensor. The road icing sensor adopts microwave electric signal detection technology and has temperature detection and compensation functions. It is installed on a suitable road section and can detect water accumulation, water spray, ice and freeze in real time. Ice thickness and other status data. In winter weather such as rain and snow, roads are prone to ice, causing various potential risks to pedestrians and even personal injury accidents. Therefore, it is necessary to conduct ice accumulation detection on some important road sections, which can remind the road maintenance department to take timely measures. , to avoid the occurrence of severe accidents.

The road ice sensor has a simple structure and is easy to install. It has an RS485 communication interface and can communicate with Modbus RTU protocol. It can also be set to send data regularly to meet the diverse communication needs of users.

2. Main technical indicators of road ice sensor

1. Detection resolution: 0.1mm

2. Icing range: 0～10.00mm

3. Measurement accuracy: 0.5mm

4. Detection status: dry, raining (water), water accumulation, ice

5. Communication method: RS485

6. Working voltage: 5VDC

7. Working temperature: -40℃～85℃

8. Power: <0.5W

9. Protection level: IP67

3. Main features of road ice sensor

1. It can detect ice thickness, rain, water accumulation and other conditions.

2. Equipped with temperature detection sensor.

3. Measurement data can be actively transmitted at regular intervals.

4. Each device has a unique number, which must be carried when communicating, which is suitable for building large-scale monitoring systems.

4. Application scope of road ice sensor

Equipment or buildings that need to detect icing conditions, such as cooling towers, communication towers, wire towers, bridges, ocean platforms and roads.

5. Structural dimension diagram of road ice sensor

6. Installation method of road ice sensor

1. Install it at a location where icing needs to be detected, with the surface detection antenna exposed near the icing point.

2. During installation, pay attention to protecting the detection antenna part to prevent collision.