Road Surface Monitoring

Road Surface Monitoring

Model:FT-LMZK1
Brand:fengtu
Road Surface Monitoring uses multi-spectral remote sensing technology to accurately detect the thickness of ice, snow and water on road surfaces....

1.Road Surface Monitoring Product Introduction

Road Surface Monitoring uses multi-spectral remote sensing technology to accurately detect the thickness of ice, snow and water on road surfaces.Road Surface Monitoring uses remote sensing technology to avoid damage to roads and thus no traffic interference caused by the installation of road weather stations.

Under road conditions where embedded road sensors are inconvenient or impossible to install, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is safe and convenient.It requires little maintenance and is an ideal choice for road weather system components.

It can be installed on existing weather stations or other buildings with unobstructed views from the road.

Multispectral measurement technology enables accurate detection of the thickness of ice, snow and water on road surfaces.

By providing road surface condition information, we provide road management departments with accurate monitoring data and take response measures before road safety dangers arise.

2.Road Surface Monitoring system consists of: road condition sensor, collector, pole bracket, power supply system, cloud platform

3.Road Surface Monitoring product application

1.Install bridge deck at long distance

2.Accident-prone areas

3.Areas with heavy traffic flow

3.Rain and snow-prone areas

4.Road Surface Monitoring Product Features

1.Measure road water, ice and snow from a distance

2.Measure the road condition

3.Measure the degree of water accumulation, ice surface and slipperiness

4.Non-embedded design

5.Anti-rust

6.Infrared detection up to 15 meters

7.No need to close lanes, simple installation and maintenance

8.Sturdy design, all-weather measurement

5.Road Surface Monitoring technical parameters

Detection distance and detection area diameter2-8 meters; 23cm
Installation angle to horizontal line30-80 degrees
Power supply and power consumptionDC12-24V; 0.6W
Operating temperature and humidityTemperature: -40ºC to +60ºC; Humidity: 0 to 95%
Water thickness0-10mm
Ice thickness0-2mm
Snow thickness0-2mm
Slippery degree0.01 (slippery)-0.82 (strong friction)
pavement condition reportDry, wet, wet, snow, ice, ice water mixture
Highway weather phenomena (optional)Road temperature: -40ºC to +60ºC
Weather phenomena: rain; snow; heavy fog
pavement materialConcrete, asphalt pavement
communicationRS485, RS232
Hello, my friend!
What kind of support do you need? Our products is sure to satisfy you.
*Name
*Email
Phone
Country
*Message