Icing monitoring system

1.Product introduction of Icing monitoring system

Icing monitoring system can monitor all kinds of poles, insulators, transmission lines icing, ice thickness and the surrounding meteorological environment in real time.Ice coating of transmission lines and various ice disaster accidents caused by it have seriously endangered the safe operation of my country's power system.Ice disaster accidents in my country have the characteristics of long duration, high frequency and large coverage area; severe ice covering in micro-meteorological areas will cause the electrical and mechanical performance of power transmission and transformation equipment to decline, and severe ice covering will cause overload and uneven ice covering.De-icing at different times causes tension differences, ice-covered flashover of insulator strings and dance of ice-covered conductors, which are the main causes of ice-covered accidents.

2.Working principle of Icing monitoring system

The microwave icing monitoring device for transmission lines does not require power outage installation.The equipment uses unique microwave detection technology combined with temperature analysis to achieve real-time monitoring of icing conditions on various types of poles, towers, insulators, transmission lines, etc.

The system sensor uses microwave detection technology.Based on the difference in feedback signals of microwave signals to different substances such as ice, water, air, etc., it can monitor the icing information in the sensor's sensitive area, and based on the strength of the signal and the distribution of icing in the sensor's sensitive area.The information is used to calculate the ice thickness.The ice alarm value can be set according to different ice thickness information to facilitate the startup of the deicing system.The host samples, filters, amplifies, and AD converts the ice signal in real time, and then passes it through our professional After algorithm conversion, the icing rate and thickness values are obtained.When the thickness of the ice reaches the preset threshold, an icing alarm signal is sent, which is then transmitted to the background through wireless networks such as 4G.Assess the hazards of icing in real time to ensure safe line operation.

3.Product features of Icing monitoring system

1.Able to monitor icing, ice thickness, wind speed, direction, temperature, humidity, atmospheric pressure, optical rainfall and total radiation in the tower area online in real time, and automatically store and upload data to the background;

2.Able to analyze icing conditions and automatically alarm or prompt;

4.Technical parameters of Icing monitoring system

1.Ice coating thickness: Measurement principle: microwave detection, maximum measurement thickness: 30.00mm, detection resolution: 0.01mm; power: <1W (optional ice melting device 15W)

2.Wind speed: measurement principle ultrasonic, 0~60m/s (±0.1m/s) resolution 0.01m/s; (Invention patent, patent number ZL 2021 1 0237536.5)

3.Wind direction: Measurement principle ultrasonic, 0~360° (±2°); Resolution: 1°; (Invention patent, patent number ZL 2021 1 0237536.5)

4.Air temperature: Measurement principle: diode junction voltage method, -40-60℃ (±0.3℃), resolution 0.01℃; (Calibration certificate of Beijing Meteorological Bureau)

5.Air humidity: Measurement principle capacitive, 0-100%RH (±3%RH), resolution: 0.1%RH; (Calibration certificate of Beijing Meteorological Bureau)

6.Atmospheric pressure: Measurement principle: piezoresistive, 30-1100hpa (±0.25%), resolution 0.1hpa; (Calibration certificate of Beijing Meteorological Bureau)

7.Optical rainfall: Measuring principle is photoelectric, 0-4mm/min (≤±4%), resolution 0.01mm; (Invention patent, patent number ZL 2022 1 1306149.3)

8.Total radiation: Measurement principle: photoelectric effect, 0-1800W/㎡ (<±3%), resolution 1W/㎡;

9.Collector power supply interface: GX-12-3P plug, input voltage 5V, with RS232 output Json data format, collector power supply: DC5V±0.5V peak current 1A,

10.Sensor modbus, 485 interface: GX-12-4P plug, output power supply voltage 12V/1A, equipment configuration interface: GX-12-4P plug, input voltage 5V

11.Solar power supply, equipped with lead-acid battery, optional 30W 20AH/50W 40AH/100W 100AH.Charge controller: 150W, MPPT automatic power point tracking, efficiency increased by 20%

12.Data upload interval: adjustable from 1 minute to 1000 minutes