Fully automatic sky imager

1. Overview of the fully automatic sky imager

The fully automatic sky imager is also called the fully automatic all-sky imager and the all-sky cloud analysis system. The fully automatic sky imager can automatically record all-sky cloud information and convert it into quantitative cloud information through the advanced cloud detection algorithm in the software. . With the development of natural science, cloud observation continues to be valued. In the early days, cloud observation required professionals to observe with the naked eye and manually record the observation results. The accuracy of the observation results varied greatly depending on the experience and technical level of the observer. In order to reduce labor costs, improve observation accuracy, and achieve unattended all-weather automatic observation of the sky, manual observations are gradually replaced by fully automatic sky imagers. The fully automatic sky imagers cooperate with the use of machine deep learning algorithms to greatly improve The degree of automated cloud observation has enhanced people's ability to research and utilize solar energy resources.

2. Function description of fully automatic sky imager

FT-TK2 fully automatic sky imager is a new generation of fully automatic, full-color sky imaging equipment independently developed by our company. The equipment has a large viewing angle of 220°. Through IOT intelligent network technology, it can obtain real-time image information and meteorological information. The data is transmitted to the back-end computing center. After the data is processed by quality control and AI image recognition models, real-time image data, cloud coverage, light transmittance and additional weather data are provided to user terminals in various forms.

3. Hardware specifications of fully automatic sky imager

Image sensor: 1/2.7" Progressive Scan CMOS 5 million pixels (default 2 million output, 2 million, 3 million, 5 million three levels can be adjusted remotely through the cloud)

Minimum illumination: Color: 0.01Lux F1.2

Image signal-to-noise ratio: ≥50dB (AGC OFF)

Wide dynamic range: ≥80dB

Maximum image resolution: 2592×1944

Supported image resolution: 2592×1944/2560×1920/2048×1536/1080P (1920×1080)

Lens viewing angle: about 220° full fisheye

Focal length: 2.8mm

Clear aperture (Aperture): F1.8

Input voltage range: 11~13.5VDC, standard input voltage: 12VDC (supports both adapter and solar power supply methods)

The maximum power consumption of the whole machine does not exceed 10W, and the average power consumption is 6.5W.

Network communication method: 4G

Temperature and humidity sensor:

Temperature: Sensor accuracy ±0.3℃, accuracy applicable range 0℃~65℃, use range -20℃~55℃

Humidity: Sensor accuracy ±3%RH, accuracy applicable range 10%RH~90%RH, use range 0%RH~100%RH

Atmospheric pressure sensor: Sensor accuracy ±1hpa, range 300hpa~1100hpa

Working temperature -20℃~55℃

button:

Power button: power on/off

Setting key: When the device is running, press it and wait for a while. The device will enter Bluetooth mode, which is used for user binding and network reset.

Indicator light:

Power on: the yellow light stays on for no more than 5 seconds

Bluetooth mode: red light and green light, flashing intermittently every second

Operating status: 4G network mode, green light flashes every 10 seconds

Network not available: red light flashes for 30 seconds

The sampling frequency of weather data and images is adjustable and can be uploaded as quickly as 1 minute.

Product material: PC

External dimensions (length, width and height): 305x175x330mm

Waterproof grade: IP55

Product weight: 2kg

Installation method: vertical pole

Single set configuration list