Dust noise monitor

Dust and noise monitors are also called construction site dust and noise monitors. Dust and noise monitors are mainly used at construction sites to monitor the status of dust and noise control at construction sites in real time. Dust and noise monitors operate around the clock, and environmental protection departments can use the data to determine whether construction site emissions exceed standards. As my country's requirements for environmental governance become higher and higher, PM2.5 has increasingly become an important indicator of environmental monitoring. As an important component of PM2.5 indicators, dust in the air has also become the target of monitoring by environmental protection departments at all levels. . The current main means of detecting dust is manual sampling and analysis, which has low detection efficiency and wastes a lot of manpower and material resources. In order to improve air quality, our company uses wireless sensor technology and laser dust testing equipment to independently develop an all-weather outdoor dust monitoring system. In addition to dust monitoring, it can also monitor PM2.5, PM10, PM1.0, TSP, noise, and environment. Temperature, ambient humidity, wind speed, wind direction and other environmental factors, the test data of each test point are directly uploaded to the monitoring background through wireless communication, which greatly saves the environmental protection department's monitoring costs and improves monitoring efficiency.

Dust noise monitor application industries:

Mainly suitable for construction sites, demolition sites, coal mines, industrial parks, communities, urban environments, residential areas, etc.

Technical parameters of dust and noise monitor:

1. PM range: 0～1000ug/m3, resolution: 1ug/m3, accuracy: ±10%F·S;

Air temperature sensor range: -40~70℃, resolution: 0.1℃, accuracy: ±0.2℃;

Air humidity sensor range: 0~100%, resolution: 0.1%, accuracy: ±3%;

Wind speed sensor range: 0~60m/s, resolution: 0.1 m/s, accuracy: ±0.3m/s;

Wind direction sensor range: 8 directions;

Noise sensor range: 30～130db, resolution: 0.1db accuracy: ± 0.5%F·S

2. Pm measurement adopts the principle of laser scattering, uses fans as power, and has a built-in insect-proof net to prevent inaccurate data measurement due to insects.

3. The equipment has 1 channel of shutter box (temperature, humidity, noise, PM2.5, PM10, air pressure) collection, 1 channel of wind speed collection, and 1 channel of wind direction collection.

4. Supports secondary development, including networking module, default GPRS upload, can be connected to various regional government project platforms for free (the 4G upload method can be changed), and has 1 standard modbus output by default.

5. It has one relay output by default. If Pm2.5 exceeds the limit, it can automatically associate with the fog cannon for on-site dust reduction control;

6. The header displayed on the LED screen can be changed anytime, anywhere, and the header can be changed through the configuration APP and software;

7. The LED large screen size is 54cm*102cm, and the display can be three or four lines and can be changed at will;

8. Optional on-site sound and light alarm, waterproof box, and lightning rod

9. Simple and convenient installation, fool-proof installation