Road condition detector

Road condition detector

Model:FT-LMZK2
Brand:fengtu
The road condition detector can measure water, ice and snow on the road from a distance, non-embedded design, no need to close the lane, easy installation and maintenance....

1. Product introduction of road condition detector

The road condition monitoring station uses remote sensing technology to avoid damage to the road and thus will not interfere with traffic caused by the installation of road weather stations.

Under road conditions where embedded road sensors are inconvenient or impossible to install, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is safe and convenient. It requires little maintenance and is an ideal choice for road weather system components.

It can be installed on existing weather stations or other buildings with unobstructed views from the road.

Multispectral measurement technology enables accurate detection of the thickness of ice, snow and water on road surfaces.

By providing road surface condition information, we provide road management departments with accurate monitoring data and take response measures before road safety dangers arise.

2. Road condition detector system consists of: road condition sensor, collector, pole bracket, power supply system, cloud platform

3. Application of road condition detector products

1. Install bridge deck at long distance

2. Accident-prone areas

3. Areas with heavy traffic flow

3. Rain and snow-prone areas

4. Product features of road condition detector

1. Measure road water, ice and snow from a distance

2. Measure the road condition

3. Measure the degree of water accumulation, ice surface and slipperiness

4.Non-embedded design

5. Anti-rust

6. Infrared detection up to 15 meters

7. No need to close lanes, simple installation and maintenance

8. Sturdy design, all-weather measurement

5. Technical parameters of road condition detector

Monitoring distance2-15 meters
Detection diameter23cm
angle30-90 degrees
power input220VAC, 24VDC
Maximum power consumption5W (including lens heating)
Operating temperature-38ºC to +70ºC
Working humidityDegree 0 to 100%
Road state parameter outputRoad water thickness: 0.00-10mmResolution: 0.01mmAccuracy: 0.1mm
Road ice thickness: 0.00-10mm
Snow thickness on road: 0.00-10mm
Road slippery degree: 0.00-1Resolution: 0.01
(*) Road temperature: -38ºC to +60ºC
(*)Road humidity: 0-100%
(*)Ambient temperature and humidity: -40ºC to +70ºC
(*) Atmospheric pressure: 150-1100hPa
pavement condition reportDry, wet, wet, snow, ice, ice water mix (sun cream)
Lens contamination detectionPollution level measurement of optical lenses and internal automatic pollution compensation
pavement materialConcrete, asphalt pavement
communicationRS485, RS232
mean-failure10 years
SafetyNo safety issues – infrared remote sensing measurement technology
  • Previous:Road condition monitoring station
  • Next:没有了!
  • Hello, my friend!
    What kind of support do you need? Our products is sure to satisfy you.
    *Name
    *Email
    Phone
    Country
    *Message