Micro water quality monitoring station

Model：FT-LSZ06

Brand：fengtu

Micro water quality monitoring station Used to monitor water temperature, electrical conductivity, PH, turbidity, dissolved oxygen, ammonia nitrogen and other water quality parameters....

Get a Free Quote

1. Micro water quality monitoring station product introduction

Micro water quality monitoring station Used to monitor water temperature, electrical conductivity, PH, turbidity, dissolved oxygen, ammonia nitrogen and other water quality parameters.Micro water quality monitoring station takes water quality sensors as the core.By monitoring and analyzing various water quality parameters, and transmitting the collected data to the platform, it can remotely view real-time data and remotely manage equipment, and at the same time effectively monitor water quality change trends.Over-limit alarms and intelligent processing can also represent a comprehensive index of water quality based on the correlation between real-time water quality parameters, providing customers with a large amount of objective, detailed and effective data, which has practical significance for solving water pollution problems.

At present, the FT-LSZ06 Micro water quality monitoring station developed and produced by Shandong Fengtu Internet of Things Technology Co., Ltd.is widely used in aquaculture, sewage treatment, reservoirs, rivers and other places

2.Product features of Micro water quality monitoring station

1.Low power collector: static power consumption is less than 50uA

2.Standard GPRS networking, support for extended Bluetooth and wired transmission

3.Support modbus485 sensor expansion

4.Solar charging management MPPT automatic power point tracking

5.1.5m carbon steel bracket

6.SMS alarm, send SMS to the designated mobile phone after exceeding the limit

7.ABS material protective box, corrosion-resistant, anti-oxidation, waterproof grade IP66

8.There is no need for additional processes such as wiring, station construction, chemical preparation, and post-maintenance personnel.Compared with the national standard water quality monitoring station, it is more convenient to use and install, and the observation data is more intuitive.

9.The system can integrate integrated meteorological environment monitoring data

3.Micro water quality monitoring station system composition

Micro water quality monitoring station is mainly composed of basic bracket (including vertical pole, ground cage, ABS anti-corrosion and corrosion-resistant protection box), power supply system, monitoring host, water quality sensor, and cloud platform.

4.Technical parameters of Micro water quality monitoring station

name	Measuring range	resolution	Accuracy
water temperature sensor	-50～80℃	0.1℃	±0.5℃
conductivity sensor	0~200mS/m	0.2mS/m	＜±7%
Water quality pH sensor	0~14	0.01pH	±0.1pH
Turbidity sensor	0.1~3000NTU	0.1ug/l	<±5%FS
Dissolved oxygen	0~20mg/l	0.1mg/l	±3%
Ammonia nitrogen sensor	0-100mg/l	0.01mg/l	±3%FS
Remark:	Multi-channel data collector with 232 and 485 interfaces; Chinese LCD screen with backlight; Power supply mode: solar power or 220V AC; Communication mode: MQTT protocol and direct communication with the IoT cloud platform;