Insect monitoring system

1. Insect monitoring system product introduction

Insect monitoring system can attract pests by light, automatically pack insect bodies, automatically take photos of insect bodies, and upload images to the server.

Name:Insect monitoring system

Comply with standards: Comply with the GB-T24689.1-2009 standard image-based insect situation reporting tool.

Main purpose: to analyze and predict the occurrence and development of pests, provide services for modern agriculture, and meet the needs of pest forecasting and specimen collection.

Working principle: Utilizing modern light, electricity, CNC and other technologies, it realizes functions such as trapping pests, high-temperature insecticides, conveyor belts for transportation, and automatic operation of the entire lamp. System operations such as insect trapping, insect killing, insect dispersion, photography, transportation, collection, and drainage can be completed automatically without human supervision, and then wireless transmission technology and Internet of Things technology can be used to upload environmental weather and pest conditions in real time. Go to the designated agricultural cloud platform.

2. Main structure of Insect monitoring system

Host material: spray plastic

Overall machine size: 717mm*727mm*1569.2mm.

Components: insect trap, impact screen, insecticide device, high-definition camera, main control system, mechanical components, rain and snow sensor, light sensor, professional metal box frame

3. Technical parameters of Insect monitoring system

Operating system: microcontroller

Power supply mode: standard 220VAC, optional solar power supply.

Equipment power consumption: Complete machine power consumption: ≤200W; Standby power consumption ≤25W;

Working environment: 0~70℃, 0~85% (relative humidity), no condensation

Insulation resistance: ≥2.5MΩ (leakage protection)

Insect trapping device: The default optical insect trapping principle, the optional drug trapping principle. The optical insect trap uses a 20W black light tube with a main wavelength of 365nm, and the light tube startup time is ≤5S.

Impact screen: made of high-transparency glass material, forming an angle of 120 degrees with each other. Single screen size: 595±2mm long, 213±2mm wide, and 5mm thick.

Pesticide device: upper and lower two-layer far-infrared insect body treatment chamber, the lethality rate is not less than 98%, and the insect body completion rate is not less than 95%. After the far-infrared insect body treatment chamber works for 15 minutes, the temperature can reach 85℃±5℃.

High-definition camera: This device supports a 5-megapixel camera, and the camera adopts a plug-in method to facilitate on-site replacement. The camera can collect the status of insects on the conveyor belt in real time, and the clarity of the captured images can meet the requirements for manual identification of insect species.

Main control system: The main control system can provide Bluetooth APP configuration tool and support Bluetooth contactless configuration. Supports changing the device working mode and individually controlling the startup and operation of each component of the device. Supports functions such as remote upgrade program, base station positioning, automatic time adjustment, and APP setting parameters via Bluetooth.

Communication method: supports 4G communication, optional Ethernet RJ45 communication.

Mechanical components: The interior of the box contains insect rain baffles, insecticidal baffles, drying baffles, vibration devices, insect removal devices, fill lights, cameras and other mechanical devices and control execution equipment.

The vibration device of the Insect monitoring system can vibrate the trapped insects, so that the insects can be spread evenly on the conveyor belt to avoid accumulation of insects and ensure that the characteristics of each insect can be clearly photographed. It cooperates with the platform software AI analysis and identification system , which can ensure that insects trapped in different time periods are not confused.

Rain control technology: Detects on-site weather conditions through rain and snow sensors. It operates normally when there is no rain or snow, and stops operation when there is rain or snow. After identifying rain and snow weather, control the opening and closing direction of the insect rain baffle to achieve insect rain separation.

Light control technology: The light sensor detects the light intensity on site and is not affected by instantaneous strong light. When the illumination is less than the program set value, the control device operates normally; when the illumination is greater than the program set value, the control device stops running.

Time control technology: You can set the working start time, working duration, single working cycle time, insect trap light turning on time, delay turning on time after rain, etc.

Working mode: Supports automatic working mode, manual working mode, and supports working mode switching.

Automatic working mode workflow: Flying insects are attracted by the insect trap light source → enter the blinds → crash into the impact plate → fall into the insecticide chamber after impact → kill the insects at high temperature in the insecticide chamber → flip the insecticide baffle → the insect corpses fall into the dryer Dry warehouse → The drying warehouse performs high-temperature drying. After drying is completed → the drying baffle flips → the insect carcasses fall on the vibrating plate → the vibrating plate starts → the insect carcasses are spread flat on the conveyor belt → the conveyor belt will transport the flying insect carcasses Go to the camera → take photos → upload photos to the server.

Manual working mode introduction: Supports controlling the operation of various mechanical components through Bluetooth configuration APP, cloud platform, and insect monitoring APP.

4. Installation method of Insect monitoring system:

1. Choose the installation location of the insect detection cabinet, prefabricate a flat hard cement platform in advance as much as possible, and then drill holes according to the fixed size of the base.

2. Use the expansion screws in the accessories to install them into the 8 holes.

3. Align the 8 expansion screw holes of the raised welding feet at the four corners under the equipment support column, and tighten them with a wrench.

5. Insect monitoring system insect monitoring and reporting platform:

1. The insect reporting platform can log in and manage accounts according to different permissions, and can allocate accounts with different permissions of at least level 8 or above.

2. The insect monitoring and reporting platform can remotely view the current working status of each component of the Insect monitoring system, and the status can be stored and historical records can be viewed.

3. Users of the pest forecasting and reporting platform can add pest types.

4. The pest forecasting and reporting platform has statistical charts of changes in pest types and quantities by region and time, including bar charts and line charts.

5. The insect situation forecasting and reporting platform uses the second-generation insect situation database for automatic AI analysis. At the same time, users can make corrections to the AI analysis results by themselves.

6. The insect situation reporting platform supports secondary development and provides a professional insect situation reporting platform and APP client free of charge. The platform can provide API interfaces. SDK development interfaces based on java and C# can be provided.