multi-function optical fiber fault tester

1.Multi-function optical fiber fault tester product overview

6422multi-function optical fiber fault The tester has single-mode 1310nm, 1550nm, 1490nm, 1625nm, 1650nm, multi-mode 850nm, 1300nm and customized special wavelength testing capabilities.It can provide single wavelength, multi-wavelength, in Line test and other modules, the maximum dynamic range is 46dB, which can be used for trunk long-distance multi-branch communication network testing; the minimum event blind zone is 0.8m, the near-end connection status can be clearly distinguished; the maximum sampling resolution of 2.5cm can accurately locate the event point .In addition, it provides a variety of convenient functional options such as stable light source, optical power meter, visible red light source, fiber end face inspector, and WiFi module.

2.Main features of multi-function optical fiber fault tester

Maximum 46dB dynamic range, 256k data sampling points;

PON network online test function;

Single and multi-mode integrated test function;

Communication light automatic monitoring function;

Supports Bellcore GR196 and SR-4731 file formats.

1.Rapid automatic testing

The automatic test function of 6422 eliminates the need for users to know more details about the operation of the instrument.The test steps become very simple.They only need to connect the optical fiber to the corresponding OTDR port of the product and click the [Test] button.The instrument will automatically set the corresponding settings.test conditions and give the final test results, including test curves and event lists.

2.Unique PON network test function

6422 is a test instrument for optical fiber access network and FTTx.It has built-in PON network test function and can test each branch of the PON network through up to 1:128 optical splitter.

3.Automatic light monitoring and alarm function

When an OTDR tests an optical fiber link, if there is a communication optical signal in the optical fiber, the test results will be inaccurate and even cause irreparable damage to the detector inside the instrument.6422 has the function of automatically monitoring the communication optical signals in the optical fiber under test.As long as the optical fiber under test is connected to the optical interface of the 6422, it will automatically sense and monitor whether there are communication optical signals in the optical fiber during the test phase.Once an optical signal is detected, it will Prompt alarm information in time to provide timely protection for the instrument.

4.Intelligent graphic display function of optical fiber link events

Select the analysis mode switch button to perform graphical analysis of the current trajectory curve and display the graphical analysis interface.

5.Fiber end face inspection function

The instrument is equipped with the end face detection function.Click the [End Face Detection] button to enter the end face detection operation interface.

3.Typical applications of multi-function optical fiber fault tester

4.Technical specifications of multi-function optical fiber fault tester

VFL(option)

Working wavelength: 650nm±20nm

Output power: 2mW (typical)

Working mode: CW, 1Hz, 2Hz

lOptical power meter (optional)

Wavelength range: 850nm～1650nm

Power range: -60dBm～+3dBm (or -40dBm～+26dBm)

Uncertainty: ±5% (-25dBm, CW)

lStable light source (optional)

Working wavelength: same as OTDR working wavelength

Output power: ≥-5dBm

Working mode: CW, 270Hz, 1kHz, 2kHz

lWiFi module (option)

Through the WiFi module, the interconnection between the mobile client and the OTDR is completed, the mobile phone can remotely control the OTDR and receive the test results returned by the OTDR.

lFiber end face inspection instrument (optional)

l6422 OTDR standard module technical specifications

1.Single wavelength module

2.Dual wavelength module

3.Three wavelength module

4.Four wavelength module

Note:

1.The ambient temperature is 23℃±5℃, the maximum test pulse width, the average time is greater than 180s, and SNR=1;

2.Measuring range ≤1.6km, pulse width 3ns, fiber end face reflection loss ≥40dB, typical value;

3.Measuring range ≤1.6km, pulse width 5ns or less, fiber end face reflection loss ≥50dB, typical value.

5.Ordering information

Host: 6422multi-function optical fiber fault tester

Standard configuration:

Optional accessories:

Shopping information:

Note: The host and OTDR modules can be selected separately, and one host is supported with multiple OTDR modules.

Note: Due to the need for design improvement, the above content is subject to change without prior notice.