Spore Capture Analyzer

Name: Spore Capture Analyzer

Spore Capture Analyzer is mainly used to monitor the stock of disease spores and their diffusion dynamics, realize all-weather unattended, real-time collection, analysis and monitoring of spores.

Comply with standards: Comply with GB/T24689.32009 plant protection mechanical spore capture instrument (device)standard

Main functions: It can be fixed in the reporting area to observe the type and quantity of spores in a specific area at fixed points. It is used to monitor the stock of disease spores and their spread dynamics, and provides reliable data for predicting and preventing disease epidemics and infections. It is a crop that agricultural plant protection departments should equip. Special equipment for disease detection.

Spore Capture Analyzer main structure: The main body is made of spray-coated metal and consists of a rainproof upper cover, filter, main box, and bottom bracket.

Power supply voltage: 220VAC or solar power supply system

Average power consumption: ≤7w

Working environment: -30℃~70℃, 0~95% (relative humidity), no condensation

Overall machine size: 700*700*1665mm;

Slide: 75*25mm. The slide needs to be coated with Vaseline and placed gently on the glass slide under the vent. Experimenters need to manually change the slides, and when observing spores, take the slides back to the laboratory for culture and observation. Slides are reusable and need to be cleaned and disinfected before reuse.

Air collecting port wind speed: 0.3~5m/s

Configuration method: Provide a dedicated configuration APP to configure device parameters through Bluetooth non-contact

Spore Capture Analyzer working mode:

①. Continuous working mode: The device starts working continuously when it is powered on, and stops working when the power is turned off.

②. Intermittent working mode: work N hours -> stop M hours, and then cycle back and forth. The work stop time can be flexibly set.

③. Scheduled working mode: work for 1 hour -> stop for 0.1 hour, and then cycle back and forth

Rain and snow control: It is equipped with a rain and snow sensing device by default. The rain control function is turned on by default. Automatic recognition of rain and snow weather stops working and can be set to off.

Light control: Equipped with a light intensity sensing device by default, the light control function is turned off by default and can be set to on. After turning it on, the device will start working when it recognizes that the light intensity is less than the set value.

Things to note:

(1)The installation location of the spore detection cabinet should be a flat, hard cement-poured elevated floor to ensure that the installation location is flat and should not be tilted.

(2)After the equipment is installed, the equipment shell needs to be grounded.

(3)Try to stay away from high-power interference equipment to avoid affecting the normal operation of the equipment, such as frequency converters/motors, etc.