Hand held anemometer

1.Product introduction of hand-held wind speed and direction meter

The hand-held anemometer is also called the hand-held anemometer.The hand-held anemometer can measure wind speed, wind level and corresponding wave height. instrument. The system adopts precision sensors and smart chips, which can accurately measure the two meteorological elements of wind direction and wind speed at the same time. The built-in large-capacity FLASH memory chip can store meteorological data for at least one year; the universal USB communication interface can be connected to a U disk to export data, which is convenient for users to further process and analyze meteorological data.

Handheld anemometers can be widely used in meteorology, environmental protection, airports, agriculture, forestry, hydrology, military, storage, scientific research and other fields.

2. Functional characteristics of hand-held wind speed and direction meter

2.1-inch screen LCD display temperature and wind speed;

●Special wind direction dial (16 directions) and pointer are used to indicate real-time wind direction;

●Large-capacity data storage, which can store up to 40,000 meteorological data (data recording interval can be set between 1 and 60 minutes);

●Universal USB communication interface, convenient for usb data download;

●Only need three AAA dry batteries for power supply; low power consumption design, long-time standby;

●Scientific and reasonable structural design, easy to carry.

3. Technical parameters of hand-held wind speed and direction meter

4. Precautions for using the hand-held wind speed and direction meter

1. It is recommended to clean up the data storage every time you need to record the time when starting up, so as to prevent the large amount of data when exporting the currently required data, resulting in too long time.

2. It is recommended to export the data content in the weather station in time after use.

3. Please read this manual carefully before use to ensure that the sensor is inserted into the corresponding sensor interface and the direction of the battery is correct;

4. When the instrument shows that the battery is low, please replace the battery in time to prevent the battery from leaking and damaging the instrument;

5. Prevent chemical reagents, oil, dust, etc. from directly infringing on the sensor, do not use it for a long time under condensation or extreme temperature environments, and do not perform cold or thermal shock;

6. The instrument is a precision device, please do not disassemble it by yourself to avoid damage to the product when using it;

7. Please keep the test certificate and certificate of conformity, and return it with the product when repairing.