Remote camera spore capture system

1. Product introduction of remote camera spore capture system

The remote photographic spore capture system is also called photographic spore capture instrument and automatic spore capture analyzer. The remote photographic spore capture system uses modern photoelectric numerical control technology to realize remote and automatic capture of various pollen and spore information, automatic photography, and automatic picture data. Upload and other functions. The equipment uses high-magnification optical microscopic imaging technology, precision limit technology, automatic intelligent focus fusion technology, Internet of Things transmission control technology and other technical means to take pictures of tiny spore targets and upload the pictures to the designated agricultural cloud platform in real time. The platform uses image optimization algorithms to accurately process and analyze uploaded images.

2. Product features of the remote camera spore capture system

1. There are horizontal and vertical dual-axis motors inside the spore equipment

2. Built-in glass slides, the slides can cumulatively display the current usage level, when the slides are about to be used up, the platform can remind the replacement time of the slides when it expires, the slides can be manually reset, and there is a password for clearing Protected, slides can be replaced manually

3. The interface can display the progress of a single sampling of the slide in real time;

4. The working mode can be set from the interface: it is divided into two modes: automatic and manual;

5. There is a high-resolution microscope in the equipment, which can clearly show 5~100um spores.

6. After a special air duct air circulation design, the air inlet and outlet form an air duct to ensure air circulation, effectively reduce the collection repetition rate, shorten the sampling time, and improve the collection efficiency. The sampling time of the suction port can be set for a single sampling.

7. The working time can be set arbitrarily, and the sampling frequency can be set arbitrarily;

8. The spore trap has a built-in 10.4-inch high-definition large-screen display, windows operating system, and a good human-computer interaction interface. Support local viewing and shooting of photos, configuration of device parameters, control of devices and other functions

9. Statistical analysis: Cloud server technology is used to realize manual statistics and analysis of germ spore pictures, real-time manual remote viewing and confirmation, shortening the forecast period

10. Support automatic time calibration with the server

3. Technical parameters of remote camera spore capture system

1. Main structure: spray plastic material

2. Power supply voltage: 220VAC, optional 480w 200ah solar power supply

3. Maximum starting power: ≤65W; stable working power: ≤50W; standby power ≤26.4W

3. Machine size: 420.0*308.7*787.7mm

4. Communication method: 4G upload, based on cellular network, TCP/IP upload data, support dynamic domain name resolution DNS, just insert a mobile phone card to upload data to the remote monitoring software platform

5. Working environment: -20-70°C, 0-95% (relative humidity), non-condensing

6. Built-in glass carrier tape: it can be used continuously for up to 365 days with one replacement, and it can be taken 3 times a day

7. Insulation resistance ≥ 2.5MΩ (leakage protection)

8. Camera: 800W pixels

9. Operating system: WINDOWS

10. Gas sampling: collection time 60~1200 minutes (setting range), available collection area: length*width (mm) 50*21mm;

11. Working time setting: timing start, 24-hour system, 24-hour opening time can be set arbitrarily;

4. Cloud platform of remote photographic spore capture system

1. It has the functions of remote real-time viewing and control, and real-time analysis of spores

2. The working mode of the spore automatic capture analyzer can be switched remotely in real time, to realize automatic and remote photography, and to realize the early warning function of carrier tape usage

3. In the automatic mode, the initial working time, working time, sampling time, working interval, carrier belt single movement distance pulse number, etc. of the spore automatic capture analyzer can be set, and can be sent to the device remotely

4. In the remote control mode, the suction port, exhaust port, sampling port, light source status, and carrier belt motor status of the spore automatic capture analyzer can be remotely controlled