Home>Products>Smart highway>Light Transmittance Meter>Flue dust transmittance detector
Flue dust transmittance detector

Flue dust transmittance detector

Model:FT-YGT1
Brand:fengtu
Flue dust transmittance detector is used to measure the dust concentration of the environment and pipes and to continuously monitor the concentration of particles emitted by various pollution sources....

1.Measurement principle of Flue dust transmittance detector

Flue dust transmittance detector is used to measure the dust concentration of the environment and pipes and to continuously monitor the concentration of particles emitted by various pollution sources.The detection light traverses the flue, and the single optical path measurement system consists of a transmitter and a receiver.A high-brightness LED light source is installed in the transmitter.The beam it emits passes through the diffuser and then through the flue.It is projected onto the focusing lens in the receiver and is focused on the measurement detector; the other part is directly focused on the reference detector..The light transmittance or light opacity value can be obtained by calculating the ratio of the signal intensities obtained on the two detectors, from which the light transmittance (or light opacity) and dust concentration values can be obtained.

2.Main features of Flue dust transmittance detector

direct continuous measurement

Small size, light weight and compact structure

Direct display of light transmittance or opacity

With lens contamination monitoring and compensation device

Automatic calibration and manual calibration, convenient and flexible

Measuring path 0.5-5 meters

With air purge channel

Long life LED signal light source

No moving parts – low maintenance

Simple installation and debugging

3.Technical parameters of Flue dust transmittance detector

Working principleAcross the flue, single optical path transmission
light sourceHigh brightness LED
response time3 seconds to reach 98% of final value
Measuring rangeLight transmittance 0-99.99%
resolution0.01%
Detectable gasSmoke, fumes or related dust gases
Optical path length0.3-2 meters standard type (other lengths can be customized)
average time1-59 seconds
Calibration and CalibrationManual calibration and calibration (with calibrator)
showLCD liquid crystal display
Analog output4-20mA current loop
digital outputRS485/232
Relay outputTwo switching outputs (alarm value setting)
working temperature-20-50°C
Working humidity0-99% (no condensation)
Supply voltage220VAC; optional 12, 24VDC
Power consumptionTransceiver system maximum 18W
vibration2Hz-60Hz, maximum amplitude 2mm
Shell materialdie cast aluminum
Protection levelIP67
  • Previous:没有了!
  • Next:Tunnel visibility monitor
  • Hello, my friend!
    What kind of support do you need? Our products is sure to satisfy you.
    *Name
    *Email
    Phone
    Country
    *Message