Axial force meter

1. Product introduction of Axial force meter

Axial force meter is a sensor used to measure the internal stress of structures. It is used for bridge load test measurement and axial force measurement of supports such as deep foundation pits.This series of Axial force meters, also known as reaction force meters, is a vibrating wire force sensor with the advantages of high resolution, strong anti-interference performance, sensitive response to concentrated loads, and stable performance.It can measure the stress of the foundation on the superstructure for a long time.The reaction force, steel support axial force and load during static pressure pile experiment can be measured simultaneously by installing a temperature sensor to measure the temperature of the installation point.

2.Axial force meter application scenarios

Bridges, tunnels, rail transit, buildings, highways

3.Product features of Axial force meter

1.Using imported steel strings, the temperature performance is stable and the service life is long.

2.Built-in temperature sensor for easy temperature compensation

3.The main components use special surface treatment technology and are suitable for use in harsh environments.

4.High resolution, strong anti-interference ability, and sensitive response to concentrated loads

4.Technical parameters of Axial force meter

Measuring range: 1000kN, 2000kN, 3000kN, 4000kN, 5000kN, 6000kN

Resolution: 0.1%FS

⼼Operating temperature: -20℃~+60℃

Temperature measurement accuracy: ±0.5℃